manualshive.com logo in svg

Sculpt AXIS EPI950, Installation & User Manual

Share
Download
Sculpt AXIS EPI950 Installation & User Manual Download Page 22

22

DIAGRAM D

DIAGRAM E

DIAGRAM F

STEP 4.

Fix outdoor air kit exchange into place, utilising access 

located in the interior of the appliance refer to diagram E for 

the correct positioning of washers and screws.

Once completed connect ducting to run to exterior air 

connection, ensure the exterior connection is protected by a 

vermin proof cowl. 

Please refer to diagram D for reference

STEP 5.

Included with the outdoor air kit is a damper and damper 

control, installation of this feature will assist the user in the 

control of the air intake for the outdoor air kit. The position 

of the control can be varied, we recommend assessing which 

location is ideal for your installation, keep in mind the user 

should be able to easily access this feature at all times.

Please refer to diagram F for reference

Reference application for the damper control from 0% 

(Closed) to 100% (Fully open).

Please refer to diagram F for reference.

3. OUTDOOR AIR KIT

Summary of Contents for AXIS EPI950


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands