scoole SC HT CL1 1000 WT, Instruction Manual

Page: 8 / 44

Fig . 2
5. Attach the supporting legs to the lower part of the appliance on the left and right sides so that
mounting holes are aligned with holes on the appliance body (Fig.2).
6. Drive the mounting screws to the available holes applying a sufficient force (Fig.2).
Check security of attachment.
7. Turn the appliance to the right position and place it onto the even
horizontal surface strictly vertically.
The appliance is ready for operation!
8. Also there are included 4 plastic brackets (2 up, 2 low) for wall mounting of the convector in the
scope of delivery. If it is required to use the convector on a wall, you should install the brackets on
the back side of the device. Then fix it by screws that are included in the scope of delivery and hang
the device on a wall.
It is necessary to comply with the minimum distance from objects when you are installing the device.
(Fig.3)
8
Уважаемый покупатель!
Благодарим Вас за удачный выбор и приобретение бытового электрического
обогревателя конвекционного типа
Scoole . Он прослужит Вам долго.
WARNING !
The appliance should be operated only with installed supporting legs or mounted on the wall.
Operation of the convector witout the supporting legs or without wall mounting is prohibited!
INSTRUCTION MANUAL
Fig . 3