scoole SC HT CL1 1000 WT, Instruction Manual

Page: 14 / 44

14
the control panel and temperature display will extinguish, but the "POWER" indicator will still light.
5.4. Switching of the appliance off or setting of the timer value [0.0] will cancel the timer function for
the convector switching off.
6. Setting of timer function for switching on
6.1. When the convector is off and only the "POWER" indicator is alight, simultaneously press the
"SET" and
buttons. The "TIMER" indicator on the control panel will flash. The display will " "
show the flashing value [0.0].
6.2. Press the button to set the convector switching on time from 0 to 24 hours with " " or " "
1-hour step. The display will show the countdown of time remaining till the moment of the convector
switching on.
6.3. The set time value will be stored. The display will show the set value and the "TIMER" indicator
on the control panel will light.
6.4. Upon expiration of the timer setting, the convector will be switched on to the economic mode
and it will maintain the set temperature.
7. Audible signals
Upon switching on/off and pressing buttons, the convector gives an audible signal.
8. Blocking
8.1. To block the system, simultaneously press and hold the buttons for 3 seconds, " " or " "
when the convector is on. The display will show "[ ]" symbol. In 5 seconds, the symbol will disappear
and the display will show the temperature value. At that, the buttons on the control panel will be
blocked and their pressing will display "[ ]" symbol.
8.2. To unblock the system, press and hold the
buttons for 3 seconds or switch the " " or " "
convector off.
9. "RESTART" function
In case of a short-time power interruption, the convector will automatically switch on upon
resumption of power supply and work with the last user settings (except for the timer settings).
10. Switching off
To switch the convector off, press the "POWER" button on the control panel and disconnect the
appliance from the electric mains.
INSTRUCTION MANUAL