scoole SC HT CL1 1000 WT, Instruction Manual

Page: 12 / 44

12
Operation of SC HT С L1 series convectors
1. Switching on the convector
Insert the plug of the power cord to the receptacle to connect the convector to the electric mains.
The "POWER" indicator on the control panel will light up. After that, press the "POWER" button.
2. Selection of heating power modes*
For selection of heating power mode, press the "SET" button three times to display the symbol of
the last set power. Using the "
or button, select the necessary heating power. Upon " " "
selection of the low heating power, the display will show "LO" symbol; upon selection of the high
heating power, the display will show "HI" symbol.
* - (except for SC HT CL1 1000 WT model)
3. Temperature setting
3.1. Temperature can be set in the range from +5 to +30°C with 1°C step.
3.2. The factory temperature setting of the comfortable mode is +24°C; the factory temperature
setting of the economic mode is +17 °C.
INSTRUCTION MANUAL
6 . "SET" button
This button is used for selection of operation modes, selection of heating power (except for SC HT
CL1 1000WT series), and timer setting.
7 . "POWER" button
This button is used for switching of the convector on and off.
8 . " " button
This button is used to decrease the selected value.
9 . "ECONOMY" indicator
This indicator lights up during operation of the convector in economic mode.
10. LED-display
It displays the temperature value, heating power modes (except for SC HT CL1 1000 WT series),
and timer setting.