SME1202A
33
Save
Touch this key, [YES] and [NO] will be displayed in the soft key zone. When [NO] is
selected, the current operation will be cancelled; when [YES] is selected, the
numerical keyboard will pop up and then you can input the file name and press
[ENTER] to finish. Thus the current settings in all pages will be saved to the file.
(NOTE: When storing a file, if the inputting file number already existed, the save
operation will overwrite the original file.)
Delete
Touch “Delete”, if “YES” is selected, the instrument will delete the selected file.
Copy to E:
Touch “Copy to E”. The instrument will copy the selected file to a U disk.
Select
Touch “Select”, the tick mark
√
will appear on selected file. SME1202A can
simultaneously copy several selected files to a U disk.
Touch “Select” once again, the selected file will be cancelled from selection.
Save Measurement Results
In the “MEAS DISP” page, touch “Start Save” in soft key zone to save measurement
results to a U disk. Touch “Stop Save”, the instrument will stop saving measurement
results.
Operations of External File and Folder
Operations of external file are similar to that of internal file.
Operations of external file folder are as below:
(1) Touch the name of the desired file folder to enter into the corresponding folder;
(2) Touch “PgUp” in the right soft key zone to return to the upper page shown as figure
4-4 above.
(3) Touch “Pgdn” in the right soft key zone to return to the lower page shown as figure 4-4
above.
Total there are 5 pages in <INTERNAL FILE> and 4 files can be stored on each page.
There are 10 pages in each folder of <EXTERNAL FILE> and 4 files can be stored on
each pageh