SME1202A
27
4)
System Setup and File Manage
4.1 System Setup
Press
[SYSTEM]
to enter into the <SYSTEM SETUP> page as shown in figure 4-1.
Figure 4-1 System Setup
On this page, the following functions can be set: BEEPER, PASSWORD, BUS MODE,
LANGUAGE, TRIGER, KEYSOUND, BAUD RATE, HANDLER VCC AND TIME.
4.1.1 BEEPER
This function is used to control the status of beeper. If the system beeps, it indicates the
warning beep of illegal key or touch.
Touch
BEEPER
, the following soft key zone will be displayed:
ON
Touch this key to turn on the beeper function.
OFF
Touch this key to turn off the beeper function.
You can touch soft key zone to set corresponding functions.
4.1.2 PASSWORD
This function is used to set the password.
Touch
PASSWORD
, the following soft key zone will be displayed:
OFF
Touch this key to turn off the password protection function. This function would be
disabled only when the preset password is correctly input.
LOCK SYSTEM
Touch this key to enable the password function. Please input the password which will
be required to be input when opening a file or starting up the instrument.
