SME1202A
31
NOTE:
CSV and STA folders might be automatically generated when a U disk is
connected.
Structure of Folder/File in a U disk is shown in figure 4-2.
Figure 4-2 file structure in a U disk
When using a U disk on SME1202A, you should pay special attention to the following
points:
1. Use a U disk with the USB2.0 interface.
2. The U disk file system should be FAT16 or FAT32. FAT16 or FAT32 standard should be
used to format the U disk. If the U disk memory exceeds 512M, it is recommended to use
FAT32 standard to format the disk.
3. Before a U disk is connected to SME1202A, you are recommended to save the data on it
and we will not be liable for the data loss.
4. In order to rapidly save the instrument data to a U disk, it is not recommended to store too
many files or folders.
Operation Procedures
Touch
FILE SETUP
to enter into the <internal file> page (or directly press the FILE button
on the front panel) as shown in figure 4-3 below.
Touch [Internal File] or [External File] to respectively display files stored in the internal
FLASH and the external U disk. Touch [Exit] to exit the file setup page.
