20
SME1202A
3.2.8 OPEN CLR
This function is used for operating open clear of the instrument.
Touch the corresponding zone. The following items will be displayed in the soft key zone.
ON
It is used for setting the OPEN CLR as ON. If the open clear is successful, the OPEN
CLR state changes to ON; if the open clear is failing, the OPEN CLR state keeps
OFF.
OFF
It is used for setting the OPEN CLR as OFF.
Touch the corresponding key in soft key zone to select the relevant function.
NOTE:
If the user operates the open clear successfully, the clear base used in the
instrument is the base obtained when operating this open clear; if the user
operates the open clear unsuccessfully or sets the OPEN CLR as OFF, the clear
base used in the instrument is the
Factory Default.
3.2.9 Average
This function is used for setting the test average times of the instrument. The set range is
1-199.
Operation Procedures for setting the Average :
Procedure-1:
Touch this key to select the option and then the colour of this option becomes the colour of
the cursor.
Touch this key (cursor) again to enter into the number soft keyboard, input the required
average times and then press the ENTER key to confirm and return to <MEAS
SETUP> page.
Procedure-2:
Touch the average zone needs to be modified on the screen and the following items will
be displayed in the soft key zone.
↑↑
(+ +)
Touch this key and the instrument will increase the average times (set value) rapidly
by 10.
↑
(+)
Touch this key and the instrument will increase the average times (set value) by 1.
↓
(-)
Touch this key and the instrument will decrease the average times (set value) by 1.
↓↓
(- -)
Touch this key and the instrument will decrease the average times (set value) rapidly
by 10.
NOTE:
1. When the MEAS TIME is set as 0s (i.e. this procedure is set as OFF), the Average
times can be set as 1-999.
2. When the MEAS TIME is not set as 0s (i.e. this procedure is set as ON), the set
