Scientific Atlanta WebSTAR DPW941 User Manual Download Page 46 | Manualshive

Page: 46 / 60

background image

Changing the Ethernet Adapter Configuration

45

Restoring Firmware with the Firmware Restoration Utility

The Firmware Restoration utility is a rescue tool for the WebSTAR DPW941
Wireless Ethernet Adapter in the event that a previous firmware upload failed.
This utility is available in the support CD that came with the WebSTAR DPW941
Wireless Ethernet Adapter package.

A failed firmware upgrade causes the WebSTAR DPW941 Wireless Ethernet
Adapter to enter a failure mode. Use the Firmware Restoration utility to find and
upload new firmware for the WebSTAR DPW941 Wireless Ethernet Adapter.

Complete these steps to restore the firmware in the WebSTAR DPW941
Wireless Ethernet Adapter.

1. Visit the WebSTAR Web site to download the latest firmware for the device.

2. Launch the Firmware Restoration utility from the Microsoft Windows desktop

by clicking

Start

>

All Programs

>

WebSTAR Wireless Ethernet Adapter

>

>

Firmware Restoration.

Result:

The

Firmware Restoration

window appears.

3. Click

the

Browse

button to locate the firmware file.

4. After selecting the firmware file, click the

Upload

button to begin the firmware

restoration.

Note:

The restoration process takes about 3 to 4 minutes to finish. During

restoration, the Power and Wireless LEDs remain lit, while the Ethernet LED
flashes slowly.

If you have problems uploading a firmware file while using a network hub, try
connecting your computer directly to the LAN port.

«
...
44
45
46
47
48
...
»

Summary of Contents for WebSTAR DPW941





























































Reviews:

No comments

Related manuals for WebSTAR DPW941

POINT I/O 1734-AENT

Brand: Allen-Bradley Pages: 24

Brand: Targus Pages: 103

Brand: Linksys Pages: 2

TL-PA201 STARTER

Brand: TP-Link Pages: 2

ZyXEL ZyAIR B-400

Brand: ZyXEL Communications Pages: 31

Brand: Patton electronics Pages: 57

Brand: 3idee Pages: 7

Brand: Black Box Pages: 20

Mini Port Replicator

Brand: Keyspan Pages: 41

Brand: Sunnen Pages: 2

Brand: Conceptronic Pages: 209

Brand: Philips Pages: 2

Brand: OBDLink Pages: 12

Cordless Serial Adapter

Brand: Socket Pages: 49

CompactFlash/SDIO Connection Kit with Bluetooth Wireless Technology

Brand: Socket Pages: 91

Brand: Nintendo Pages: 19

Brand: CREVIS Pages: 8

Baseus C-C3UEHVMSDC35

Brand: ALZA Pages: 46

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands