Scientific Atlanta WebSTAR DPW941 User Manual Download Page 10

Page: 10 / 60

About the WebSTAR Model DPW941 Wireless Ethernet Adapter

About the WebSTAR Model DPW941 Wireless Ethernet Adapter

This section describes the physical features of the WebSTAR DPW941 Wireless Ethernet Adapter. This section
also presents a detailed description of the LED indicators.

Top View and LED Indicators

The DPW941 has three LED indicators (Ethernet, Wireless, and Power). Refer to
the following table for additional details about the LED indicators.

ETHERNET
WIRELESS

POWER

802.11g 54Mbps

LEDs

T11446

LED Status

Indication

Ethernet On

The device is connected to an Ethernet
network.

Off

The device is off or not connected to an
Ethernet network.

Wireless On

The device is associated with an access
point or other wireless device.

Off

The device is not associated with an
access point or other wireless device.

Blinking

The device is transmitting or receiving
data.

Power

The device is on and ready.

Off

The device is off or performing boot
sequence.

Blinking

A firmware upgrade failed.

Summary of Contents for WebSTAR DPW941





























































Search results

Summary of Contents for WebSTAR DPW941

Reviews:

Related manuals for WebSTAR DPW941

Brands by name

Popular brands

Scientific Atlanta WebSTAR DPW941, User Manual

Search results

Summary of Contents for WebSTAR DPW941

Reviews:

Related manuals for WebSTAR DPW941

Brands by name

Popular brands