Changing the Ethernet Adapter Configuration
33
Scan Mode Options
Find the connection with the strongest link quality
—When the
Reset
button
is pressed for less than 5 seconds, the WebSTAR DPW941 Wireless Ethernet
Adapter connects to an access point or wireless device with the strongest link
quality.
Same as the above mode but only in the profile table
—When the
Reset
button is pressed for less than 5 seconds, the WebSTAR DPW941 Wireless
Ethernet Adapter searches for an access point or wireless device in the Profile
Table; then the DPW941 connects to the device with the strongest link quality.
Same as the above mode but find extra site in my location
—When the
Reset
button is pressed for less than 5 seconds, the WebSTAR DPW941 Wireless
Ethernet Adapter searches for an access point or wireless device in the Profile
Table and in your location; then the DPW941 connects to the device with the
strongest link quality.
Profile Scan (total x)
—Allows you to connect to a saved wireless network by
their sequence in the Profile Table. Press the
Reset
button once to connect to
the first wireless connection in the Profile Table. Press the
Reset
button again to
connect to the second wireless connection, and so on.
For example, if you have three saved profiles in the Profile Table, the WebSTAR
DPW941 Wireless Ethernet Adapter automatically connects to the first profile.
Press the
Reset
button to connect to the second saved profile. Press the
Reset
button again to connect to the third saved profile.
Specified profile scan (just no. x)
—When the
Reset
button is pressed for less
than 5 seconds, the WebSTAR DPW941 Wireless Ethernet Adapter
automatically connects to the specified profile. The saved profiles are numbered
from 1 ~ x. You must select the profile number using the Specified Profile field.
Note:
When using the Alphabet Scan, the access point or wireless device you
wish to connect to must have a disabled WEP encryption and available SSID.
Specified Profile
—Allows you to select a saved wireless network in the Profile
Table. The WebSTAR DPW941 Wireless Ethernet Adapter automatically
connects to the selected profile when
Scan Mode
is set to
Specified profile
scan
.
Important:
Click
Apply
when done. Otherwise, click
Restore
to load the default
values.