WebSTAR™ Model DPW941™ Wireless Ethernet Adapter User’s Guide
12
Hardware Installation
This section provides information on how to install the WebSTAR DPW941 Wireless Ethernet Adapter.
System Requirements
Before installing the WebSTAR DPW941 Wireless Ethernet Adapter, make sure
that your system’s network meets the following requirements:
•
An Ethernet RJ-45 port (10BaseT/100BaseT)
•
At least one IEEE 802.11b/g device with wireless capability
•
TCP/IP protocol and Internet browser installed on a PC or laptop
Device Installation
Follow these instructions in the order shown to install the WebSTAR DPW941
Wireless Ethernet Adapter.
1. Install the device utilities from the support CD. Go to
Installing the Utilities
in the
Configuring the WebSTAR DPW941 Wireless Ethernet Adapter
for
detailed installation instructions.
2. Connect the device to your computer, network hub, switch, or router.
Before You Proceed
Note the following guidelines before installing the WebSTAR DPW941 Wireless
Ethernet Adapter:
•
The length of the Ethernet cable that connects the device to the network (hub,
ADSL/cable modem, or router) must not exceed 100 meters.
•
Place the device on a flat, stable surface as far from the ground as possible.
•
Keep the device clear from metal obstructions and away from direct sunlight.
•
Keep the device away from transformers, heavy-duty motors, fluorescent lights,
microwave ovens, refrigerators, and other industrial equipment to prevent
signal loss.
•
Install the device in a central area of your home or office to provide ideal
coverage for all wireless mobile devices.
•
Install the device at least 20 cms from a person to insure that the product is
operated in accordance with the RF Guidelines for Human Exposure adopted
by the Federal Communications Commission.
