4007520 Rev B PowerVu D9834/D9835 Satellite Receiver User’s Guide
7
IMPORTANT
The installer channel is a reserved channel associ-
ated with the current setup, and is usually channel zero (0). Return
to video programming by pressing the
CH
/
or the up /down
/
multi-function buttons, or you can change channels directly
using numbered remote control buttons.
About saving changes
Any changes made to the current receiver setup are saved using the
OK
button. After
saving changes, press
MENU
to either return to the previous menu, or continually press
MENU
to exit to video.
Before exiting a menu, you may be prompted to save or discard changes made to the
receiver setup (e.g., Preset & LNB Setup menu), depending on the changes made. Saved
changes are used to update the current receiver settings. Discarding changes restores the
previously saved settings.
If you are prompted to save settings, select
YES
to save the new setting(s) or
NO
to dis-
card the changes.
WARNING!
Saved settings are automatically restored when-the re-
ceiver is restarted after AC power is switched off or interrupted. Upon
restarting, the receiver defaults to the last virtual channel displayed
for more than 20 seconds after exiting from menus (see also Changing
the Lock Level).
Note that immediately after saving changes, you are automatically returned to the previ-
ous menu.
About the current channel
When you navigate to menus from a video channel, the information displayed is associ-
ated with the current (video) channel. If no changes have been made to the current setup,
you are automatically returned to the same video channel when you exit to video.
Summary of Contents for PowerVu D9834
Page 1: ...PowerVu Model D9834 and D9835 Satellite Receivers User s Guide...
Page 62: ......
Page 63: ......