Scientific Atlanta PowerVu D9834, User Manual

Page: 22 / 64

6 PowerVu D9834/D9835 Satellite Receiver User’s Guide 4007520 Rev B
Using Menus
This section contains all the information you need for setting up your PowerVu Satellite
Receiver and antenna installation. Before you begin using the receiver, or if you are
modifying your equipment installation, you may need to change the current settings to
suit your operating requirements.
IMPORTANT! Access to your PowerVu Satellite Receiver and to on-
screen menus are password-protected. Depending on the current lock
level setting, you may be prompted for the password before you can
display menus, or when making changes to the current receiver setup.
Note that if Lock Level 3 is currently set, pressing the
MENU
button
displays a password prompt.
About using the on-screen menus
All screens or menus are accessed from the
Main Menu
. While viewing any channel,
you can display on-screen menus for viewing or changing the current receiver setup.
While in menus, you can change the current receiver settings, and/or display other
menus. Some menus contain setup information which is available for viewing only, and
cannot be changed. Numbered menu options are used to display other menus. Access to
menus and changeable menu options are controlled by system lock levels and a security
password. For more information about lock levels and the password, see the Administra-
tion menu.
To change a setting on a menu…
Use the , , and buttons to move to the setting you want
to change.
Press the
OK
button to select the setting.
For numeric options, enter the number directly using the num-
bered buttons on the remote control or use the
and buttons to
change the value one digit at a time.
Press OK to save the setting and exit the menu. A help message is
displayed at the bottom of the screen.
Press MENU to move to the previous menu.
To display the Main Menu (if Lock Level 3 set)…
Press the MENU button.
An on-screen prompt is displayed when entering the current
Password.
Enter the current password and press OK to display the Main
Menu
(for security, a default character is substituted for each
number pressed).