4.1 Statim 2000 — Using the Cassette
When removing the cassette after a cycle, exercise caution as the metal areas will be
hot and the cassette may contain hot steam.
• To open the cassette
:
1. Hold the cassette handle with your thumbs facing inward on the cassette latch.
2. Push downward on the cassette latch.
3. Raise the cassette lid upwards and disengage
the hinge.
4. Rest the lid on its outer surface.
• To close the cassette
:
1. Align the hinge tab on the cassette lid with
the hinge slot on the rear of the bottom tray.
2. As you begin to close the lid, the hinge tab and slot will engage.
• Inserting the cassette into the Statim 2000
:
1. Place the end of the cassette into the unit.
2. Gently push inward until you hear a “click” sound.
Never push the cassette into the Statim with force as the interior components could
be damaged.
• Removing the cassette
:
1. Grasp the handle with two hands and pull away from the unit.
2. Pull the cassette clear of the unit and set down on a firm surface.
• Disengaging the cassette
When not in use, the cassette should be disengaged. To disengage the cassette, grasp
the handle and pull the cassette out until there is a 15 mm to 20 mm (
1
/
2
" to
3
/
4
") gap
between the front of the Statim 2000 and the cassette handle.
• STAT-DRI /STAT-DRI PLUS
Treatment of the interior surfaces of the cassette with the Stat-Dri / Stat-Dri Plus drying
agent, provided with your unit, will enhance the drying process. (Replacement bottles
are available from SciCan, order number 2OZPLUS, 8OZPLUST, 32OZPLUS).
Page 11
4. Instructions For Use
/
Figure 7
cassette latch
