Schwarz SB10B, Operating Instructions Manual, Page: 75 / 96

8.7 Mechanical spare and wear parts cover cleaning 75
Item no.010 105 Lid
Ø50x6
Inner diameter = Ø10.5 Transverse cleaning
Item no.010 106 Protective sheet for disc brushes Cover cleaning
Item no.011 101 Deep-groove ball bearing
Outer diameter = Ø32
Inner diameter = Ø12 Cover cleaning
Manual adjustment
Item no.011 109 Deep-groove ball bearing
Outer diameter = Ø52
Inner diameter = Ø25 Width adjustment
Item no.012 043 Spindle for cover cleaning
M27x780 Cover cleaning
Height adjustment left
Motor side
Item no.012 044 Spindle for cover cleaning
M27x550 Cover cleaning
Height adjustment right
Item no.012 045 Drive shaft for cover cleaning
Ø25x3120 Cover cleaning
Height adjustment
Item no.012 053 Nut M27
VK-45x45x46
Brass Cover cleaning
Height adjustment
Item no.012 071 Spindle for height adjustment
cover cleaning
M20x300 Cover cleaning
Scraper bar
Item no.014 073 Roller including deep-groove ball
bearing
Ø45x78 Width adjustment
Support front, center, rear
Item no.014 080 Roller carriage screw
M12x160 ???
Item no.014 085 Spacer ring
Outer diameter = Ø20
Inner diameter = Ø12.5
Length = 12.5 Width adjustment
Rear support