Schwarz SB10B, Operating Instructions Manual, Page: 65 / 96

8.3 general mechanical spare and wear parts 65
Item no.021 202 Open-faced wrench
SW 75-10 Brush shaft
Item no.021 204 Extractor Brush shaft
Item no.021 303 Catch brass Doors
Item no.022 003 Bearing sleeve including deep-
groove ball bearing Ø80x25
Inner diameter deep-groove ball
bearing = Ø25 Width adjustment,
Height adjustment, among
others
Item no.022 004 Adjustment ring
Ø50x20
Including threaded pins
Inner diameter = Ø25 Width adjustment
Height adjustment
for bevel wheel
Item no.022 005 Adjustment ring
Ø50x30
Including threaded pins
Inner diameter = Ø30 Width adjustment
Item no.024 017 Cylinder
PDI-050-0050-A-P-M Stop bolt
Item no.024 104 Maintenance unit
Compressed air Stop bolt
Item no.024 307 Energy chain
22.0380.0/70
Length = 1800 Transverse cleaning &
Width adjustment S1
Item no.024 308 Energy chain
30,050.0/100
Length = 1800 Width adjustment S2
Item no.021 158 Stop bolt Stop bolt
Item no.021 306 Bow-type handle Doors