Schwarz SB10B, Operating Instructions Manual, Page: 28 / 96

28 5 Operation
5.10.1 Information pages:
Call via symbol "18" at the operating panel. This contains information on the:

Total operating hours

Operating hours until the next service interval

Day counter: Formwork elements number and areas with reset function

Overall counter: Formwork elements number and areas
Figure 5.8 Information pages
5.10.2 Settings:
Call via symbol "2" at the operating panel. On the menu page "400 Target values", the transverse
cleaning brush application can be set. These settings are password-protected.
Figure 5.9 Settings see page 400
The further pages under settings provide information on values that is stored in the software
and information on diagnosis.
Figure 5.10 Settings pages 401, 402