Maintenance and care
42
01.00|KSP3-IM, KSP3-LH-IM |en
Manual lubrication
• Press grease either into the grease
nipples at the side or front of the
respective supply line (6/7).
• Only lubricate in the open position.
• After greasing, run through the
complete stroke several times.
• grease to be used and lubrication
Size
Grease quantity (strokes per grease
nipple)
100
2
140
2
160
2
250
3
Central lubrication
• To use central lubrication, the set-
screws of the factory sealed
connections (6, 7) must be removed.
• For proper lubrication, both supply
lines must be connected.
• The central lubrication system must be
suitable for greases of NLGI 2
classification.
• Only lubricate in the open position.
• After greasing, run through the
complete stroke several times.
• Grease to be used and lubrication
