Maintenance and care
01.00|KSP3-IM, KSP3-LH-IM |en
41
Greasing areas/lubricants
Greasing areas
Lubricant
Sliding surfaces body – base jaw
LINOMAX 200
Sliding surfaces base jaws– chuck piston
LINOMAX 200
Lubrication nipples
LINOMAX 200
Central lubrication
LINOMAX 200
All seals
RENOLIT HLT 2
Sliding surfaces cylinder piston – housing
RENOLIT HLT 2
(Product information for LINOMAX 200 can be requested from
SCHUNK)
Alternative lubricant
LINOMAX plus can also be used as an alternative to LINOMAX 200.
However, the specified clamping forces exclusively refer to the
LINOMAX 200 used by SCHUNK.
For LINOMAX plus, the clamping forces can be lower.
Lubrication
CAUTION
Allergic reactions or irritation due to skin or eye contact with
lubricants on the product.
• In case of foreseeable contact with lubricants on the product
(e.g. when lubricating or cleaning), wear protective equipment
(protective gloves, protective goggles)
To maintain reliable function and high quality of the product, it has
to be regularly lubricated. This can be done with a hand lever press
for greases or by means of central lubrication.
7.3
7.3.1
