Assembly
20
08.00 | PZN-plus | Assembly and Operating Manual | en | 0389374
Ø
Screw the product to the machine/system,
Mechanical connec-
tion
[
}
20].
✓
When mounting from the rear: use cylindrical pins for fixing
the product in place.
✓
If necessary, use appropriate connection elements (adapter
plates).
✓
Observe requirements for the adapter plate,
Mechanical con-
nection
[
}
21].
✓
Observe the maximal tightening torque, admissible screw-in
depth and, if necessary, strength class.
Ø
Secure the gripper fingers to the base jaws,
Mechanical connec-
tion
[
}
20].
✓
Use centering sleeves from the enclosed accessory pack.
Ø
If necessary, fit a pressure piece for spring-supported position-
ing of the workpiece against a stop,
Mounting of the gripper by
using a spring loaded pressure-piece
[
}
22].
Ø
Connect the sensor, see assembly and operating manual of the
sensor.
Ø
Mount the sensor,
Mounting the sensor
[
}
24].
5.2 Connections
5.2.1 Mechanical connection
Evenness of the
mounting surface
The values apply to the whole mounting surface to which the
product is mounted.
Requirements for evenness of the mounting surface (Dimensions in mm)
Edge length
Permissible unevenness
< 100
< 0.02
> 100
< 0.05
