Assembly
08.00 | PZN-plus | Assembly and Operating Manual | en | 0389374
21
Requirements for
customer adapter
plates
If the adapter plate has bores or recesses and therefore the
product is not fully flush, the minimum support surface must be
adhered to. The recess/bore in the adapter plate may not exceed
the dimension "A"; for dimensions, see the following table.
The product can be assembled from two sides.
Connections at the
housing and on the
base jaws
Assembly options
Item
40
50
64
80
100
125
Mounting the product from the front (side A)
1
Mounting screw (3 x)
M3
M3
M5
M6
M6
M8
Mounting the product from the rear (side B)
2
Mounting screw (3 x)
-
M4
M6
M8
M8
M10
Max. depth of engagement
from locating surface [mm]
• without gripping force
maintenance
-
10
13
17
18
21
Max. depth of engagement
from locating surface [mm]
• with gripping force main-
tenance (AS / IS)
-
20.5
26
32
38
45.5
3
Fitting bore for cylindrical
pins *
Ø2H7
Ø3H7
Ø4H7
Ø5H7
Ø5H7
Ø6H7
Possible recess in the adapter plate
A
Max. recess [mm]
Ø24
Ø32
Ø40
Ø55
Ø70
Ø85
Affixing the gripper fingers
4
Mounting screw(2x)
M2.5
M3
M4
M5
M6
M6
Max. depth of engagement
from locating surface [mm]
6
8
10
10
13
13
5
Centering sleeve * [mm]
Ø4
Ø5
Ø6
Ø8
Ø10
Ø10
*) Contained in accessory pack.
