SCHUNK MPG-plus 10, Assembly And Operating Manual

Page: 19 / 52

Assembly
13.00 | MPG-plus | Assembly and operating manual | en | 389216
19
Ø
Check the evenness of the mounting surface,
Mechanical connection [
}
20].
Ø
Only open the required air connections (main connection or
direct connection),
Pneumatic connection [ } 22].
Ø
Connect the product via the hose-free direct connection.
✓
Use O-rings from the accessory pack.
✓
Seal main air connections which are not required with locking
screws.
Ø
OR: Connect compressed air lines to the main air
connections "A" and "B".
✓
Screw in air connections (plug connections).
OR: Screw on throttle valve in order to be able to perform
sufficient throttling and/or damping.
Ø
Screw the product to the machine/system,
Mechanical connection [
}
20].
✓
If necessary, use appropriate connection elements (adapter
plates).
✓
Observe the maximal tightening torque, admissible screw-in
depth and, if necessary, strength class.
Ø
Secure the gripper fingers to the base jaws,
Mechanical connection [ } 20].
Ø
Connect the sensor, see assembly and operating manual of the
sensor.
Ø
Mount the sensor, Mounting the sensor [ } 23].