Assembly
34
13.00 | MPG-plus | Assembly and operating manual | en | 389216
Protrusion of the sensor to be mounted
Adjustment dimensions
Size
L1 [mm] L2[mm]
Size
L1 [mm] L2 [mm]
MPG-plus 25
6.8
3.0
MPG-plus 40
3.0
5.0
MPG-plus 25 AS
-6.0
3.0
MPG-plus 40-AS
-19.0
5.0
MPG-plus 25 IS
6.5
3.0
MPG-plus 40-IS
1.5
5.0
MPG-plus 32
4.0
7.0
MPG-plus 50
2.3
13
MPG-plus 32 AS
1.5
7.0
MPG-plus 50-AS
-16.5
13
MPG-plus 32 IS
0
7.0
MPG-plus 50-IS
2
13
5.3.7.2 Size MPG-plus 64
For this size, there is no bracket necessary. Depending on the
desired installation position, the sensor is fastened in the vertical
or horizontal slot of the gripper.
Ø
If there is a slot nut (1), move the slot nut to dimension L3 or L4
(see table "adjustment dimensions"). Move the sensor (2) into
the slot up to the stop.
OR: If there is no slot nut (1), move the sensor (2) into the slot
and adjust it to distance L3 or L4 (see table "adjustment
dimensions").
Ø
Fasten the senor using a threaded pin.
Tightening torque: 10 Ncm
Ø
Adjust the sensor, see assembly and operating manual of the
sensor.
