Assembly
13.00 | MPG-plus | Assembly and operating manual | en | 389216
29
5.3.5 Mounting the magnetic switch MMS 22-IOL
CAUTION
Risk of damage to the sensor during assembly!
•
Observe the maximal tightening torque.
5.3.5.1 Size MPG-plus 25 – 50
For these sizes, there is a bracket in vertical direction mounted
standardly.
Ø
Loosen the screws at the bracket.
Ø
Move the sensor into to the bracket up to the stop.
Ø
Tighten the screws at the bracket.
Ø
Fasten the senor using a threaded pin.
Tightening torque: 10 Ncm
Ø
Check the protrusion of sensor L1, see table "adjustment
dimension".
Ø
Adjust the sensor, see assembly and operating manual of the
sensor.
Protrusion of the sensor to be mounted
Adjustment dimensions
Size
L1 [mm]
Size
L1 [mm]
MPG-plus 25
8.8
MPG-plus 40
4.8
MPG-plus 25-AS
-4.0
MPG-plus 40-AS
2.9
MPG-plus 25-IS
7.8
MPG-plus 40-IS
-17.8
MPG-plus 32
5.5
MPG-plus 50
4.3
MPG-plus 32-AS
-4.0
MPG-plus 50-AS
-2.2
MPG-plus 32-IS
1.7
MPG-plus 50-IS
-14.8
