_________________________________________________________________________________________
XND.00041.002_B – 05/2022
25
General safety instructions
2
Intended use
2.1
The clamping device may only be used in accordance with the technical data and has been
designed for stationary application on milling machines in an industrial environment.
Using the device in accordance with the intended purpose includes compliance with the
commissioning, installation and operating instructions, and with the environmental and
service conditions as provided by the manufacturer.
The manufacturer accepts no liability for damage resulting from non-intended use.
Technical data
2.1.1
Version
max. torque
max. clamping force
KSX-C2 125 Raw part clamping
100 Nm
50 kN
KSX-C2 125 Precision clamping
120 Nm
40 kN
KSX-C2 125-L Raw part clamping
100 Nm
50 kN
KSX-C2 125-L Precision clamping
120 Nm
34 kN
Raw part clamping KSX-C2 125 and KSX-C2 125-L
Precision clamping KSX-C2 125
Precision clamping KSX-C2 125-L
Exposure to loads in excess of the max. pull-in torque results in damage to the spindle.
