_________________________________________________________________________________________
XND.00041.002_B – 05/2022
29
Description of the clamping device
3
The KSX-C2 has been designed for clamping unprocessed and processed workpieces.
The force is generated mechanically and the spindle is protected against dirt thanks to complete
encapsulation.
Raw parts clamping with jaw lift-off
At 100 Nm torque is the clamping force 50 kN.
Precision clamping without jaw lifting
At 120 Nm torque, the clamping force is 34 kN for the S version and 40 kN for the standard
version.
Improper use and clamping with too high torques will cause damage to the spindle and jaws.
Function
3.1
The clamping range can be quickly adjusted by turning the spindle with a hand crank.
The KSX-C2 can be extended for an even larger clamping range with additional pull rod extensions.
