_________________________________________________________________________________________
XND.00041.002_B – 05/2022
32
Clamping procedure
5
Precision clamping (without lifting)
5.1
Position fixed support jaw and tighten the cylinder screw 1 with a torque of 140 Nm.
The clamping range is adjustet with the movable support jaw by placing the system jaw
1-2 mm in front of the workpiec.
Tighten the cylinder screw 1 at the movable support jaw with a torque of 140 Nm.
Clamp the workpiece on the spindle with the desired clamping force.
Important:
The cylinder screw must be tightened to 140 Nm and it must not clamped without the
workpiece, as otherwise the carrier jaws could shift and could damage the base plate.
Precision clamping KSX-C2 125
Precision clamping KSX-C2 125-L
