_________________________________________________________________________________________
XND.00041.002_B – 05/2022
43
Taking out of service
14
The clamping device and all accessories can be disposed of as scrap metal without any risk.
EC declaration of incorporation
15
In terms of the EC Machinery Directive 2006/42/EC, Annex II, Part B
Manufacturer
H.-D. SCHUNK GmbH & Co.
Distributor
Spanntechnik KG
Lothringer Str. 23
D-88512 Mengen
We hereby declare that the following product:
Product designation:
Single vice, hydraulic
KSX-C2 125-H, KSX-C2 125-L-H
ID-Number:
1493614, 1493616, 1493617, 1493620, 1493621, 1493622,
1493624, 1493625, 1493627, 1493628
meets the applicable basic requirements of the
Machinery Directive (2006/42/EC)
.
The incomplete machine may not be put into operation until conformity of the machine into which
the incomplete machine is to be installed with the provisions of the Machinery Directive (2006/42/EC)
is confirmed.
Applied harmonized standards, especially:
EN ISO 12100:2011-03
Safety of machinery - General principles for design - Risk assessment and
risk reduction
EN 62079:2001
Preparation of instructions - Structuring, content and presentation
The manufacturer agrees to forward on demand the special technical documents for the incomplete
machine to state offices.
The special technical documents according to Annex VII, Part B, belonging to the incomplete machine
have been created.
Person responsible for documentation: Mr. Philipp Schräder,
Adress: see adress of the manufacturer
Mengen, Mai 2022
i.V. Philipp Schräder; Director for Development
