_________________________________________________________________________________________
XND.00041.002_B – 05/2022
34
Troubleshooting, eliminating faults
6
Lubricate the running and contact surfaces of the system and support jaws with highpressure
grease every two weeks.
Remove the support jaw out of the working position and grease the guides of the moving
support jaw at regular intervals or every two weeks.
When changing pull rod extensions, ensure sufficient lubrication.
If creaking noises occur during operation, lubricate the spindle dry-running guides immediately.
General clearing / lubrication
6.1
Remove the system jaws (1).
Release the lock (2) and remove the spindle. (3)
Loosen the carrier jaws (5) (4) and extend.
Clean and oil the base plate guide surfaces.
Refit the carrier jaws. (5)
Clean and grease the thread (3) and reinstall.
Clean and grease the contact surfaces of the system jaws and click in the system jaws. (1)
