_________________________________________________________________________________________
XND.00041.002_B – 05/2022
41
KSX-C2 125 hydraulic
12
Function
12.1
Instead of the and spindle assembly is a hydraulic spindle with spring reset fitted and t
he
power
supply
of the cylinder
via a
hydraulic unit
with
pressure regulator by the customer
.
The force is set via an external pressure controller in accordance with the diagram.
Depending on the clamping range must the short or long hydraulic cylinder be installed.
Raw part clamping KSX-C2 125 and KSX-C2 125-L
Precision clamping KSX-C2 125
Precision KSX-C2 125-L
Exposure to loads in excess of the max. hydraulic pressure of 250 bar results in damage to
the spindle.
Recommended operating medium: hydraulic oil HLP 15 – HLP 46
Important:
The hydraulic supply hose must be vented before connecting it to the vice.
Once the hose is connected, carry out some clamping actions without workpieces.
Version
max.
clamping force
max.
clamping stroke
Oil-volume
(by max. stroke)
KSX-C2 125-H Raw part clamping
50 kN
4 mm
10 cm
³
KSX-C2 125-H Precision clamping
40 kN
4 mm
10
cm
³
KSX-C2 125-H-L Raw part clamping
30 kN
4 mm
10
cm
³
KSX-C2 125-H-L Precision clamping
25 kN
4 mm
10
cm
³
