SCHUNK KGG 100, Assembly And Operating Manual

Page: 4 / 52

Table of Contents
5.3 Mounting the sensor .......................................................................................... 22
5.3.1
Overview of sensors ............................................................................... 22
5.3.2 Switch-off hysteresis for magnetic switches .......................................... 23
5.3.3 Setting dimensions for magnetic switches ............................................. 24
5.3.4 Mounting inductive proximity switch IN 40 ........................................... 28
5.3.5 Installing the magnetic switch MMS 22 / RMS 22 .................................. 30
5.3.6 Mount programmable magnetic switch MMS 22-PI1 ............................ 31
5.3.7 Mounting programmable MMS-P 22 magnetic switch........................... 32
5.3.8 Mount programmable magnetic switch MMS 22-PI1 ............................ 33
5.3.9 Mounting the magnetic switch MMS 22-IOL.......................................... 35
5.3.10 Mount the analog magnetic switch MMS 22-A ...................................... 36
5.3.11 Mount the radio system RSS-R1/T2........................................................ 36
6 Troubleshooting ..................................................................................................... 37
6.1 Product is not moving......................................................................................... 37
6.2 Product is not executing the complete stroke ................................................... 37
6.3 Product is opening or closing abruptly ............................................................... 37
6.4 Gripping force is dropping .................................................................................. 38
6.5 Product does not achieve the opening and closing times .................................. 38
7 Maintenance .......................................................................................................... 39
7.1 Notes .................................................................................................................. 39
7.2 Maintenance intervals........................................................................................ 39
7.3 Lubricants/Lubrication points............................................................................. 39
7.4 Disassembly and assembly ................................................................................. 40
7.4.1
Disassemble............................................................................................ 40
7.4.2 Assembly................................................................................................. 41
7.5 Screw tightening torques ................................................................................... 41
7.6 Assembly drawings ............................................................................................. 42
7.6.1
Assembly drawing KGG 60 and KGG 70 .................................................. 42
7.6.2 Assembly drawing KGG 80...................................................................... 43
7.6.3 Assembly drawing KGG 100 and KGG 140 .............................................. 44
8 Translation of original declaration of incorporation ................................................ 45
9 Annex to Declaration of Incorporation .................................................................... 46
4 17.00 | KGG | Assembly and Operating Manual | en | 389166