Commissioning
01.00|IndraDrive CS |en
47
Starting field bus
1 Configure field bus interface in accordance with IndraDrive CS
manufacturer documentation and control cabinet
documentation.
2 Connect and start field bus.
3 Implement and check the wiring for controller enable, stop,
reference switch and limit switch, depending on the field bus
interface.
Selecting operating mode
WARNING
If the operating mode is incorrectly set, this may lead to un-
wanted movements of the drive.
• Under no circumstances set the operating modes “Torque
control” or “Speed control”
• Activate the drag fault monitoring and configure it sensibly.
• Switch the control unit into the operating mode (phase 4).
In the standard control display on drive control unit IndraDrive CS
BB will be displayed.
Fig. 14
3.2.2
3.2.3
Summary of Contents for IndraDrive CS Series
