Assembly and settings
01.00 | EGI | Assembly and Operating Manual | en | 1396645
25
5.2 Connections
5.2.1 Mechanical connection
Evenness of the
mounting surface
The values apply to the whole mounting surface to which the
product is mounted.
Requirements for evenness of the mounting surface (Dimensions in mm)
Edge length
Permissible unevenness
< 100
< 0.02
> 100
< 0.05
Choose the installation position so that connection cables are not
damaged or cannot wrap around the product when swiveling.
Ø
Connect the product to the machine/system with screws.
✓
Use suitable connecting elements (adapter plates) if
necessary.
✓
Observe the permissible depth of engagement.
✓
Observe the tightening torque for the mounting screws.
Assembly example, EGI PROFINET variant with connecting element adapter plate
Item Designation
Note
1
Mounting screws
Finger to base jaw
Specifications for the
mounting screws:
See the following table
2
Finger interface
3
Housing
4
Adapter plate interface
5
Adapter plate
See catalog (accessories)
6
Mounting screws
Product to adapter plate
Specifications for the
mounting screws:
See the following table
