Maintenance
46
25.00 | DPZ-plus | Assembly and Operating Manual | en | 389035
Size 40–100
Fastening elements for assembly device
Item Designation
DPZ-plus
40
50
64
80
100
100
Assembly
device 1
x
x
x
x
x
101
Screw
DIN ISO 4762
M3 x 20 M3 x 25 M5 x 30 M6 x 35 M6 x 40
102
Cylindrical pin
2m6 x 6 3m6 x 8 5m6 x
10
5m6 x
14
5m6 x
14
Ø
Install and grease device 1 (100).
Ø
Insert spring (25) through the centering bore in the housing (1).
NOTE
Do not damage the sealing lips of the seal (30).
Ø
Place the cylinder piston (60) with the seal (30) on the centering
bore and evenly push it into the bore hole by hand so that it
pushes the spring (25). When doing this, pay attention to the
correct installation position.
Ø
Tighten screw (45).
Ø
Remove device 1 (100).
Ø
Insert the cylindrical pins (55) into the housing (1).
Ø
Fasten the cover (9) with the screws (46).
NOTE
The product must be in the "closed" position to prevent the
gasket (14) from being clamped in the housing (1) by the
intermediate jaw (13).
Ø
Insert the gasket (14) in the housing (1).
