SCHUNK DPZ-plus 100, Assembly And Operating Manual

Page: 40 / 76

Maintenance
40
25.00 | DPZ-plus | Assembly and Operating Manual | en | 389035
7 Maintenance
7.1 Notes
DANGER
Danger of explosion in potentially explosive areas!
•
Observe supplementary sheet for products with explosion-
resistant versions "DPZ-plus -...-EX".
WARNING
Risk of burns through contact with hot surfaces!
Surfaces of components can heat up severely during operation.
Skin contact with hot surfaces causes severe burns to the skin.
•
For all work in the vicinity of hot surfaces, wear safety gloves.
•
Before carrying out any work, make sure that all surfaces have
cooled down to the ambient temperature.
7.2 Maintenance intervals
Interval
[Mio. cycles]
for DPZ-plus
Maintenance work
40 – 125 160 –
200
2 1 Clean all parts thoroughly, check for damage
and wear, if necessary replace seals and
wearing parts,
Disassembly and assembly (previous version)
[ } 42] and Disassembly and assembly
(successor version) [
}
54].
2 1 Treat all grease areas with lubricant,
Grease/greasing areas [
}
41].