Maintenance and cleaning
9
Maintenance work
9.2
Table saw BS-350 LST, BS-400 LST-E230, BS-400 LST-E400, BS-500 LST
65
/80
1.
Open the blade protector by loosening the screws and
removing the blade protector.
2.
Dismount the cutting disc (see section 8.2).
3.
Dismount the coolant tube.
4.
Dismount the V-belt covers (upper and lower).
5.
Release the drive motor’s attachment screws and loosen the V-belt.
6.
Dismount the bearing block.
7.
Remove the 2 V-belts.
8.
Replace the 2 V-belts.
9.
Assembly takes place in the opposite order.
10. Use a thread-locking adhesive during assembly!
