manualshive.com logo in svg

Schulze BS-350 LST, Original Operating Manual

Share
Download
Schulze BS-350 LST Original Operating Manual Download Page 14

3 

Safety 

 

3.5 

Responsibility of the personnel 

 

14

/80 

Table saw BS-350 LST, BS-400 LST-E230, BS-400 LST-E400, BS-500 LST 

The operator is also responsible for ensuring that the machine 

−

  is always in a technically fault-free condition. 

−

  is maintained in accordance with the prescribed maintenance intervals. 

−

  all safety equipment on the machine is regularly inspected for complete-

ness and functionality. 

 

3.5 

Responsibility of the personnel 

In addition to the warning and safety notices in this operating manual, the 
safety, accident prevention and environmental protection provisions applica-
ble to the place of use must also be observed. 

In particular, it is the case that personnel: 

−

  inform themselves regarding the applicable occupational safety regula-

tions. 

−

  implement the behavioral requirements provided in the operating instruc-

tions for operating the machine in the place of use. 

−

  observe the allocated responsibilities for the operation, maintenance and 

cleaning of the machine properly. 

−

  must have fully read and understood the operating manual before the 

commencement of work. 

−

  the prescribed personal protective equipment applies. It must be checked 

regularly and replaced in case of damage. In particular, ear protection 
must be worn when operating the machine. 

−

  Avoid abnormal postures when working. For all work, secure footing must 

be ensured, so that balance can be maintained at all times. 

−

  Tools belonging to the device must be safely stored. They must not come 

loose during operation. 

Furthermore, anyone who assigned to the machine in their range of respon-
sibilities is responsible for ensuring that the machine  

−

  is always in technically fault-free condition. 

−

  is maintained in accordance with the prescribed maintenance intervals. 

−

  all safety equipment is regularly inspected for completeness and func-

tionality. 

−

  Ensure that the machine is protected against unauthorized use after fin-

ishing work. It must be stored in a dry, locked room against unauthorized 
persons (e.g. children). 

−

  Always pay attention to order and cleanliness in the work area, since 

loose surrounding objects can be accident sources. 

 

 

Summary of Contents for BS-350 LST

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands