3
Safety
3.1
General
12
/80
Table saw BS-350 LST, BS-400 LST-E230, BS-400 LST-E400, BS-500 LST
3
Safety
3.1
General
This section gives an overview of important safety aspects for the protection
of the user and the operators. The instructions indicate possible dangers and
serve the safe and trouble-free operation of the plant.
Where the operating, warning and safety instructions provided are not ob-
served, considerable risks can arise.
3.2
Intended use
The Table saw BS-350 LST, BS-400 LST-E230, BS-400 LST-E400, BS-500
LST is conceived, depending on the material, for wet or dry cutting. It is ex-
clusively designed for the division of mineral construction materials such as
artificial or natural sandstone, washed concrete, concrete blocks and aerat-
ed concrete. It is designed for continuous use on building sites or in factories
and may only be used for industrial purposes and only operated by trained
personnel. The Table saw BS-350 LST, BS-400 LST-E230, BS-400 LST-
E400, BS-500 LST may only be used in accordance with the environmental
conditions listed in the Technical Data. The machine may only be operated
by one person!
Proper use requires compliance with the instructions
−
for safety,
−
for operation,
−
for servicing/maintenance,
−
per the technical specifications
which are described in this operating manual.
3.3
Non-intended use
The Table saw BS-350 LST, BS-400 LST-E230, BS-400 LST-E400, BS-500
LST may not be used for cutting metal and wood.
Any other use beyond its intended use is considered improper use. The op-
erator of the machine is liable for any damage resulting from this.
