Schulte FLX-1510, Operator'S Manual

Page: 55 / 150

ASSEMBLY
FLX-1510 06/18 Assembly Section 3-9
© 2018 Alamo Group Inc.
ASSEMBL
Y
Install Arm Mount on Rotary Cutter
Install the arm mount to the rotary cutter using one
¾ X 5 and one ¾ X 6 bolts, washers and locknuts
arranged as illustrated. 3-1” washers are installed at
the threaded end of each bolt in order to prevent the
bolt threads from contacting the frame lugs.
Connect Strut to Rotary Cutter
Set the length of the strut from pivot to pivot center
according to chart below. Bolt the strut assembly to
the mounting lugs on the arm and cutter using two 1
X 4” bolts and locknuts.
Release Castor Wheels
Remove the 3/4 X 2-1/2 bolts that lock the castor wheel. The bolts and nuts can be stored in the cutout on the
plate behind the castor wheel pivot.
Machine Strut Length
XH1500 Series 3 45-1/4”
XH1000 Series 3 44-1/4”
FX315 45-1/4”
FX310 44-1/4”
FX180/FX1800 45-1/4”
FX120/FX1200 44-1/4”