Schulte FLX-1510, Operator'S Manual

Page: 101 / 150

OPERATION
FLX-1510 06/18 Operation Section 4-41
© 2018 Alamo Group Inc.
OPERA
T
ION
In the transport position, the Flex-Arm offsets the mower as much as 3’ to the right. Do not allow the trailing
mower wheels to run off the edge of the road or shoulder. Sudden turns or running off the road can cause loss
of stability and possible mower and tractor rollover, resulting in serious bodily injury or even death.
When transporting the implements reduce speed when going around corners. Do not make any sudden turns
at a high transport speed. The tractors and implements are much longer so turning speed needs to be at a low
speed, and more clearance need to be taken in account for when turning.
Reduce speed before turning or applying the brakes.
Ensure that both brake pedals are locked together
when operating on public roads.
OPS-U- 0023
When the Wings are folded for transport, the center of gravity is raised and the possibility of
overturn is increased. Drive slowly and use extreme caution when turning on hillsides.
Overturning the Implement could cause the Implement to overturn the Tractor and vice
versa resulting in serious injury or even death. Never fold wings on a hillside...the
Implement or unit may overturn.
(STI-02)
Be particularly careful when transporting the Implement using the tractor. Turn curves or
go up or down hills only at a low speed and at a gradual steering angle. Make certain that
at least 20% of the tractor’s weight is on the front wheels to maintain safe steerage. Slow
down on rough or uneven surfaces.
(STI-01)
Only tow the Implement behind a properly sized and equipped Tractor
which exceeds the weight of the Implement by at least 20%. DO NOT
tow the Implement behind a truck or other type of vehicle. Never tow the
Implement and another Implement connected in tandem. Never tow the
Implement at speeds over 20 MPH.
(STI-06)
Secure the Implement for transport before traveling on public roads. For pull-type
Implements, secure the center axle using cylinder stops or transport pin and properly attach
a safety chain between the Implement and Tractor. Secure wings in upright position on
folding Implements using wing transport locks.
(STI-7)