SERVICE AND MAINTENANCE
40 | EN
www.schmalz.com
30.30.01.01117/06
7.9.2 Maintenance Overview
As part of the functional checks, all mounting elements and cable clamps must be checked to make
sure they are securely fastened. Cables must be inspected for dirt, discoloration and arcing spots.
Designation
d
3 m
12 m Task
Note
1. Load chain
X
X
Apply oil
Measure wear
See chapter 7.3
2. Brake system
X
X
Functional test with load
See chapter 7.2
3. Electrical equipment
X
Functional test
4. Fastening screws on
suspension components
and load hook with
accessories
X
Check for cracks
Check screw torques
Measure wear on the hook
See chapter 7.8
5. Gear unit
X
Visual inspection of wear
See chapter 7.6
6. Limit switch function
X
Check switching elements
See chapter 5.2
7. Sliding clutch
X
Functional test
See chapter 7.7
Ensure safe and environmentally friendly drainage, collection and disposal of operating
and auxiliary materials.
7.10 Cleaning
Use only cleaning solvents to clean the chain hoists (do not use petroleum ether or corrosive liquids).
7.11 Expert Approval
Please observe the national accident prevention laws and regulations.
Make sure that inspections and tests are arranged for the required times and never operate the device
if it does not have the necessary official approval documents.
