SERVICE AND MAINTENANCE
30.30.01.01117/06
www.schmalz.com
EN | 35
WARNING
Danger due to parts with sharp edges and pinch points
Risk of cutting oneself when fitting the parts.
Falling parts can hit and injure people.
Danger of being crushed in the pinch points.
►
Wear an industrial safety helmet (in accordance with EN 397).
►
Wear work gloves (in accordance with EN 388 safety category 2133).
►
Wear protective work shoes (in accordance with EN 20345 safety class S1).
►
Do not reach into pinch points.
►
Exercise caution, observe accident prevention guidelines.
Service and maintenance work must be carried out at the intervals specified in chapter 7.9.
7.2 Brake System
The brake must be capable of holding the nominal load properly when there is no current.
The brake does not have air gap adjustment. If the maximum air gap (Table 6: Air gap)
is reached, the brake pad and disk must be replaced.
Fig. 25
Table 6: Air gap
SCH-S / SCH-M
SCH-L
Air gap (a)
[mm]
0.3
+0.1
0.3
+0.15
-0.05
-0.05
Air gap (a
max
)
[mm]
0.7
0.9
Torque
[Nm]
3
6
