Schmalz Jumbo Ergo Operating Instructions Manual Download Page 55 | Manualshive

Page: 55 / 57

Schmalz Jumbo Ergo Operating Instructions Manual Download Page 55

MAINTENANCE

30.30.01.00173/04

www.schmalz.com

EN | 55

9.6 Radio remote control (SRC)

Maintenance information is provided in the operating instructions supplied (Radio remote control
SRC).

9.7 Jib crane (column/wall-mounted)/crane system

Maintenance information is provided in the operating instructions supplied with the respective crane
system.

9.8 Expert approval

Please observe the national accident prevention laws and regulations.
Make sure that inspections and tests are arranged for the required times and never operate equipment
if it does not have the relevant official approval documents.

Within Germany, accident prevention regulations require the crane system and
vacuum tube lifter

J

UMBO

to be tested once a year by an expert.

As a special service within Germany, J. Schmalz GmbH offers an inspection
contract for an annual test with a certificate from an expert.

Within Germany:

Please refer to the test seal affixed to the vacuum tube lifter

J

UMBO

in this regard

(see right).

We would be happy to provide you with a quotation for this service.

«
...
53
54
55
56
57
»

Summary of Contents for Jumbo Ergo


























































Reviews:

No comments