Installation
64 / 96
EN
· 30.30.01.02851 · 01 · 03/22
1
Main body
2
Valve film
3
Sealing plate
Mounting the new valve film
Before applying the valve film, ensure that the surface of the main body is free of
any residue and grease.
For grippers with SVK technology, never remove the valve film above head height, otherwise the
valve bodies will fall out. The gripper must be removed and rotated 180° before the film is removed.
•
When replacing masking film, it must be ensured that the suction holes (SW and SVK) are affixed centrally to the
holes in the section. (Fig. 9.1)
•
Longer masking films can become misaligned despite the fact that they were initially aligned centrally.
In this case, cut the masking film (before attaching) using a steel rule and a sharp knife at the cutting points
shown.
The masking film can then be pushed together or pulled apart and the offsetting is corrected.
2
3
1
Valve film aligned
Cutting point
Offset
Corrected
