Schlumberger Reflex 72 Installation Manual Download Page 8 | Manualshive

Page: 8 / 36

Schlumberger Reflex 72 Installation Manual Download Page 8

Chapter 2 - Installation

4

Reflex 72 Reader Installation Guide

Operating System Installation Notes

Windows NT 4.0

•

Installation sequence:

Install the Reflex 72 smart card reader

software (the installation program also automatically installs the
Microsoft Smart Card Base Components if they are not already
installed), power down the system (recommended for older
desktop systems

1

), connect the Reflex 72 smart card reader, and

then reboot the system.

•

not Plug-and-Play compliant:

Operating system and Smart Card

Resource Manager detect Reflex 72 smart card reader status only
at boot-time (mid-session connect/disconnect detected only at
reboot).

•

Power light:

Power light on the Reflex 72 flickers during I/O

activity only. When the operating system detects the device
during installation, the power light flickers briefly.

1

NT computers in which the motherboard and Basic Input/Output System (BIOS) are
not compliant with Advanced Configuration and Power Interface (ACPI)
specifications.

Windows 98 /
Windows Me

•

Installation sequence:

Install the Reflex 72 smart card reader

software (the installation program also automatically installs the
Microsoft Smart Card Base Components if they are not already
installed), connect the reader, and reboot.

•

Plug-and-Play compliant:

Operating system detects Reflex 72

smart card reader at connect/disconnect; Smart Card Resource
Manager detects Reflex 72 smart card reader at boot-time
(mid-session connect/disconnect detected only at reboot).

•

Power light:

Power light on the Reflex 72 flickers during I/O

activity only. When the operating system detects the device
during installation, the power light flickers briefly.

Windows 2000 /
Windows XP

•

Installation sequence:

Attach the Reflex 72 smart card reader,

and then install the Reflex 72 smart card reader software. Initiate
a scan for hardware changes.

•

Hot pluggable

: Operating system and Smart Card Resource

Manager detect Reflex 72 smart card reader status at connect/
disconnect.

•

Power light:

Power light on the Reflex 72 flickers during I/O

activity only. When the operating system detects the device
during installation, the power light flickers briefly.

Refer to the release notes for driver version numbers and information about
potential installation issues in a specific release.

«
...
6
7
8
9
10
...
»

Summary of Contents for Reflex 72





































Reviews:

No comments