Schlumberger Reflex 72, Installation Manual, Page: 11 / 36

Installing on Windows NT 4.0
Reflex 72 Reader Installation Guide
7
2
Attach the Reflex 72 smart card reader’s serial plug to a COM port on the
computer. The Reflex 72 smart card reader communicates with the
computer through the COM port.
3
Insert the Reflex 72 smart card reader’s PS/2 jack into a connector on the
computer. If the computer does not have an open PS/2 connector, you can
use one that the keyboard or mouse currently uses, and daisy-chain the
keyboard or mouse onto the reader’s PS/2 connector.
4
If you disconnected the keyboard or mouse PS/2 jack, insert the
disconnected PS/2 jack into the reader’s female PS/2 connector, shown on
the right in the following illustration.
Reader Cables and Connectors
Use the plug’s guidepost to help you position the connector correctly. If you
break off the guidepost and insert the plug improperly, you will disable your
computer.
serial plug:
Attach to a
computer COM
PS/2 jack:
Attach to a computer
PS/2 connector
female PS/2 connector: If it is necessary to daisy-chain the reader with
the keyboard or mouse, insert the keyboard or mouse PS/2 jack here.