Schlumberger Reflex 72, Installation Manual

Page: 15 / 36

Installing on Windows 98 or Windows Me
Reflex 72 Reader Installation Guide
11
Installing on Windows 98 or Windows Me
To install the SchlumbergerSema Reflex 72 smart card reader on a Windows 98
or Windows Me computer, complete these tasks, which are described in detail
in the sections that follow.
1
Install the Reflex 72 smart card reader software.
2
Connect the Reflex 72 smart card reader.
3
Reboot the computer.
Step 1: Install the Reflex 72 smart card reader software
Go to the Reflex Readers Download website (
www.reflexreaders.com/
Support/Downloads/downloads.html ) to download the latest Reflex 72 driver
package for Win98/Me. If the Microsoft Base Components are not already
installed on your computer, you will also need to download and install that
software.
See the package’s Install Notes for installation instructions.
Step 2: Connect the Reflex 72 smart card reader
1
Attach the Reflex 72 smart card reader’s serial plug to a COM port on the
computer. The Reflex 72 smart card reader communicates with the
computer through the COM port.
2
Insert the Reflex 72 smart card reader’s PS/2 jack into a connector on the
computer. If the computer does not have an open PS/2 connector, you can
use one that the keyboard or mouse currently uses, and daisy-chain the
keyboard or mouse onto the reader’s PS/2 connector.
Be sure to install the smart card reader software before you connect the
reader. If the proper software is not present when the computer detects the
reader, a partial configuration may result. A partial configuration can
interfere with future attempts to configure the reader properly.
Refer to the release notes for driver version numbers and information about
potential installation issues in a specific release.