Schlumberger Reflex 72, Installation Manual

Page: 19 / 36

Installing or Updating on Windows 2000 or Windows XP
Reflex 72 Reader Installation Guide
15
Installing or Updating on Windows 2000 or Windows XP
To install or update the SchlumbergerSema Reflex 72 smart card reader on a
Windows 2000 or Windows XP computer, complete these tasks, which are
described in more detail in the sections that follow.
1
Connect the Reflex 72 smart card reader.
2
Install the Reflex 72 smart card reader software.
3
Initiate a scan for hardware changes.
Step 1: Connect the Reflex 72 smart card reader
1
Attach the Reflex 72 smart card reader’s serial plug to a COM port on the
computer. The Reflex 72 smart card reader communicates with the
computer through this port.
2
Insert the Reflex 72 smart card reader’s PS/2 jack into a PS/2 connector on
the computer. If the computer does not have an open connector, you can
use one that the keyboard or mouse currently uses, and daisy-chain the
keyboard or mouse onto the reader’s PS/2 connector.
Refer to the release notes for driver version numbers and information about
potential installation issues in a specific release.
Use the plug’s guidepost to help you position the connector correctly. If you
break off the guidepost and insert the plug improperly, you will disable your
computer.