EN
3
© Schletter GmbH
•
Gewerbegebiet an der B15
•
Alustraße 1
•
83527 Kirchdorf/Haag i. OB
•
Germany
•
Tel.: +49 8072 9191-200
Fax: +49 8072 9191-9200
•
E-mail: [email protected]
•
www.schletter.eu
•
Updated 01/2015
•
Subject to change without notice
Your contact in the UK: Schletter UK Limited, Tel.: +44 1296 461 800, Fax: +44 1296 461 801, E-mail: [email protected]
FixZ-15 Mounting Instructions
p
Mounting the system rails
•
Mount system rails on the fasteners -
in our example:
Hook in to the KlickTop attachment
and secure with a 6-Lobe screw (T40).
q
Extending the lower system rail
•
Position next rail.
•
Mount the E connector from below.
•
Tighten the pre-assembled 6-spanner
screws.
Please make sure that sufficient space
is left for the connector at rail joints.
r
Extending the upper system rail
•
Position next rail.
•
Mount the E* connector from below.
•
Tighten pre-assembled hexagon
socket head screws.
•
Position the additional connector
plate** against the inner side of the rail.
•
Fasten each with a self-drilling screw
(8-spanner) per rail end.
Please make sure that sufficient space
is left for the connector at rail joints.
*
**
